【🔥疑难问题】Khala挖矿疑难问题收集

别的没做啥,就删掉khala链的数据重新同步了一遍

1 Like

输入Gas地址助记词,然后就卡住没有后续了,今天试了多次都是这样

1 Like

finalized 高度完成差不多了

1 Like

更新脚本的命令是 sudo Phala update script. . 请问更新pherry 镜像的命令是什么? 谢谢!

1 Like

always → finalized#0 -
How to solve this issue ?

2021-09-19 00:18:43 [Relaychain] :gear: Syncing 73.8 bps, target=#9286209 (50 peers), best: #6459187 (0xbbbc…62f4), finalized #6458880 (0xe329…e999), :arrow_down: 185.2kiB/s :arrow_up: 152.2kiB/s
2021-09-19 00:18:47 [Parachain] :zzz: Idle (50 peers), best: #422420 (0xcd4c…e8d0), finalized #0 (0xd435…be8d), :arrow_down: 4.3kiB/s :arrow_up: 101.9kiB/s
2021-09-19 00:18:48 [Relaychain] :gear: Syncing 57.0 bps, target=#9286210 (50 peers), best: #6459472 (0xb336…22ac), finalized #6459392 (0x30b6…e740), :arrow_down: 102.5kiB/s :arrow_up: 157.3kiB/s

1 Like

fetch Unknown error occurred: Client, Application, NotInFinalizedChain
基于2021-09-17号快照同步

1 Like

17ee88f53047f8fcef1eba127ea1634

请问给另一个账户转账报BadOrigin错误,是什么问题呢?

1 Like

还没有开启,用oneshot转账

1 Like
sudo phala stop
sudo rm -rf /var/khala-dev-node/chains/khala/
sudo phala start
1 Like

----------安装DCAP驱动----------
Unpacking Intel SGX Driver … done.
Verifying the integrity of the install package … done.
Installing Intel SGX Driver …
/tmp/sgx-driver-KWdhw6 ~
install -d /opt/intel/sgxdriver/package
install -d /opt/intel/sgxdriver/scripts
cp -r package/* /opt/intel/sgxdriver/package
install scripts/* /opt/intel/sgxdriver/scripts
~

Kernel preparation unnecessary for this kernel. Skipping…

Building module:
cleaning build area…
‘make’ KDIR=/lib/modules/5.8.0-050800-generic/build…(bad exit status: 2)
ERROR (dkms apport): binary package for sgx: 1.41 not found
Error! Bad return status for module build on kernel: 5.8.0-050800-generic (x86_64)
Consult /var/lib/dkms/sgx/1.41/build/make.log for more information.

Failed to build driver. Please check if the matching kernel headers are installed.
----------安装DCAP驱动失败,请检查驱动安装日志!----------

内核升级到5.8反而安装不上,论坛里的方法试了没有任何用

1 Like

sudo phala install isgx

1 Like

tried clean the folder, but still showing finalized#0 … is this something which need to wait till fully sync? or need solve it ?

1 Like

问题1: 如上图:phala-pherry 一直在重启,请问正常吗?不正常咋解决

问题2:如上图 公钥一直0xnull,注册状态 false请问咋解决,那位兄弟帮忙的看一下

1 Like

不正常,看下docker imges 版本是否最新。

1 Like


已经多次 Insatll 和装过 isgx了,但重新start之后还是会出现 khala-node kusama-node 都是 exited 的状态。请问怎么解决呢?

1 Like

sudo docker images 看看images 版本,是不是太老

1 Like

可以说一下成功的是那个版本以上吗

1 Like

希望官方能把快照加一份百度网盘的共享,然后分享下链接,谢谢啦。BT下不动

1 Like

微信截图_20210920095753
应该同步到最新的了,有公钥地址,但是也加到池子了,但还是出现 BenchmarkTooLow: Indicating the initial benchmark score is too low to start mining. 机器评分为0,所以无法启动,这个怎么做?

1 Like


请问启动一个worker的amount怎么算的呢?8核,等级2,分数2000多
不知道填多少,有大致的计算方法么?

1 Like